EIBACH PRO KIT

The Eibach Pro-Kit Sport Lowering Spring Set improves your vehicle's looks and performance. Pro-Kit Springs lower the vehicle's center of gravity, reducing body roll in the turns, dive under braking, squat during acceleration and give the car a more solid secure feel at all times. Pro-Kit Springs also minimize the ugly fender gap that makes a car look "lifted".

EIBACH SPORTLINE

SportLine Springs are designed with the enthusiast in mind who wants the lowest possible drop on their car to achieve race car or show car looks - even on your "daily driver". Manufactured by the leader in performance suspension, Eibach Springs, the goal of Sportline Springs is to give your car the largest reduction in wheel gap and improved handling. While Eibach's Pro-Kit line of springs lowers vehicles about .75 to 1.25 inches to provide the ultimate balance of ride comfort and cornering performance, Sportline springs offer an increased drop, from 1.5 to 2 inches from stock height. Sportline Springs are as low as you can safely go on your street car. Carefully tuned linear and progressive rate spring designs that prevent your car from "bottoming out" over bumps and rough pavement. Sportline engineers have spent countless hours testing each Sportline kit to insure you will have an aggressive level of handling and appearance. The goal is to make the car as low as possible, for the looks you want, while improving the handling for the aggressive driver. Sportline engineers realized that when you are lowering your car for the extreme, the camber and caster of the car can be adversely affected. Decreasing tire contact patch and effecting tire life and cornering ability. That is why only Sportline offers alignment hardware kits especially for your car. This will remedy the problems of tire wear and limited tire contact patch. Improved handling and less money spent for tires is the result. Sportline is the only aggressive lowering spring to offer these kits in conjunction with springs. After the engineers have put together the extreme designs, Sportline spring sets are manufactured using the finest alloy spring wire on computerized machinery, with 45 years of spring manufacturing experience. Sportline offers a higher quality and a lifetime warranty. Sportline puts it all together. Race car looks with the lowest functional drop, the benefit of camber kits, engineering and quality at an affordable price. There is only one choice: Sportline.

EIBACH ROAD RACE KIT

Eibach's Road-Race kits are designed for closed-course racing enthusiasts who participate in SCCA Pro and Club racing, along with Solo 1 or 2 events where OEM spring perches must be retained. Our precision-engineered Road-Race products work best with sport-tuned damper systems due to their aggressive spring rates.

H&R SPORT SPRING

H&R is one of the leading automotive performance spring manufacturer in Europe. H&R was one of the very first companies in Germany to produce high performance lowering springs with TUV approval. Even though U.S. regulations does not require any springs to meet this standard, you will receive the highest quality spring kit that has passed very strict German Government standards regarding quality, fit, and effectiveness. All H&R Springs are progressive rate. This provides the best ride comfort possible while giving superb handling going around tight turns. All springs are designed and tested to U.S. specifications. Every spring is made from the highest quality Belgium-made Bekaert Wire available that is cold wound, heat tempered, shot peened for stress relief, tested, washed, phosphate treated for extra rust protection, and powder coated for long lasting protection and attractive appearance. The results are a high quality spring sets that will not sag, fatigue, or lose their coating. Springs that have been engineered for the enthusiast to deliver the best performance driving feel without sacrificing ride quality. Sport Springs - H&R Sport Springs are designed and engineered for each particular application. The correct spring rate for low aggressive looks, high performance handling, and no ride harshness.

H&R RACE SPRING

H&R is one of the leading automotive performance spring manufacturer in Europe. H&R was one of the very first companies in Germany to produce high performance lowering springs with TUV approval. Even though U.S. regulations does not require any springs to meet this standard, you will receive the highest quality spring kit that has passed very strict German Government standards regarding quality, fit, and effectiveness. All H&R Springs are progressive rate. This provides the best ride comfort possible while giving superb handling going around tight turns. All springs are designed and tested to U.S. specifications. Every spring is made from the highest quality Belgium-made Bekaert Wire available that is cold wound, heat tempered, shot peened for stress relief, tested, washed, phosphate treated for extra rust protection, and powder coated for long lasting protection and attractive appearance. The results are a high quality spring sets that will not sag, fatigue, or lose their coating. Springs that have been engineered for the enthusiast to deliver the best performance driving feel without sacrificing ride quality. Race Springs - Designed for the enthusiast who wants the ultimate in performance with a super low look. H&R Race Springs offer the most aggressive lowering with the most dynamic spring rates on the market. We recommend these spring sets be matched with high quality sport shock absorbers for optimum handling. (*Note: These spring sets may require special camber adjusting components.)

COMPTECH SPORT SPRINGS

One of the easiest modifications you can make to improve the look and handling of your vehicle is replacing the stock springs with a set of Comptech Sport Springs. Comptech Springs are cold wound on computer controlled CNC machines from chrome silicon wire, and are designed to improve handling by lowering the ride height and controlling body movement during acceleration, braking, and cornering. All springs are preset, which will minimize "sag" or settling of the spring once installed on the car. During final inspection, each spring is tested for proper spring rate and height, then marked and boxed in matching sets. Your vehicle will handle better, be more stable and look more aggressive without compromising your suspension's function or ride quality. They feature a durable silver powder coated finish for corrosion protection and good looks.

PROGRESS SPORT SPRING

Progress Springs have been developed for enthusiasts who seek maximum suspension performance for street and autocross use. The progressive rate springs are aggressively lowered so that they will significantly improve appearance and handling. The increased spring rates are specifically tuned to minimized body roll and provide superior ride quality. The Progress Lifetime Warranty assures enthusiasts of their exceptional quality products.

TEIN S. TECH SPRING KIT

TEIN, with the biggest market share in Japanese car suspension in Japan, has developed the S. Tech lowering spring through innovative technology. As a manufacturer specialized in suspensions, TEIN does not allow room for any compromise. Our products have achieved both low - down form and sport specification, and are loaded with technology from the sports field of N1 Endurance Racing and WRC. The S. Tech has been developed with high quality materials guaranteed to be sag free (of no more than 5mm) and comes with a protected rubber tube for noise and rust prevention.

TANABE DF210 SPRINGS

For the show or on the street, Dress-Up Form provides a clean aggressive drop while maintaining smooth ride quality. The DF210 line of springs enhance the appearance by lowering the vehicle 2~2 1/2in (50~60mm) without sacrificing comfort. Ride quality is improved by raising the spring rate 10~15%

PLEASE CALL US AT (818) 240-5390 OR EMAIL US FOR PRICING AND AVAILABILITY FOR YOUR APPLICATION.

EMAIL: bbtberge@bbtmotorsports.com

BACK TO TOP